MESSUI 0.147u4


MAMETesters Bugs Fixed

New System Drivers Supported:
-Sega Visual Memory Unit [Sandro Ronco]
-Dragon 2000 [robcfg]
-Yamaha MU-100 [Guru, R. Belmont, O. Galibert]
-Yeno/Vtech Professor Weiss-Alles [Team Europe]
-NeoGeo CDZ [FinalBurn Alpha / Barry Harris, David Haywood]
-Kaypro 286i [Cowering]
-ASEM AM 64 [Museo Dell’Informatica Funzionante]
-Ensoniq KT-76 [R. Belmont]

Systems Promoted from GAME_NOT_WORKING:

Skeleton drivers:
-ADC SuperSlave [Al Kossow]
-Televideo TS802H [Al Kossow]
-Televideo TS803H [Al Kossow]
-Genius Leader 8008 CX (Germany) [Team Europe]
-V-Tech IQ TV 512 (Germany) [Team Europe]
-General Processor Modello T [Any,The Dumping Union]
-Commodore PC-1 [rfka01]
-Commodore PC-10 III [rfka01]
-Ensoniq MR Rack [R. Belmont]

Software Lists:
-genius: Added software list for VTech Genius cartridges.
[Team Europe, Curt Coder]

-pico.xml: new Japanese dumps added [Team Europe]

-added software list for NEC APC [kaylee]

-added PCB readme for FM Towns Marty [Guru]

-xerox820: Added floppy software list. [Curt Coder]

-xerox820ii: Added floppy software list. [Curt Coder]

-pico.xml: added a new Euro dump and better documented some of the
older dumps. [TeamEurope]

-comx35: Added floppy software list. [Curt Coder]

-ibm5150.xml: added some redumps and new dumps. [Kaylee]

-wangpc.xml: added some new dumps from Don Maslin’s archive. [Kaylee]

-Add another CP/M8-6 version to the ibm5150 software list [Kaylee]

-trs80m2: Added floppies to software list. [Don Maslin’s archive]

System Driver Changes:
-Sega VMU added more bioses [El Barto]

-qx10: Downgrade floppies to DD [O. Galibert]

-super6: Added original BIOS. [Al Kossow]

-APC: Fixed a few missing keys (a few are still missing though),
and hooked the rtc clock, command and strobe lines up in a plausible
configuration. The status line clock now works though shows an invalid
value for year (the upd1990a didn’t have a year response, so perhaps
whatever rtc is being used here is a later variant which does store a
year). The “date set” command doesn’t work properly and doesn’t even
seem to poke the rtc at all. Needs further investigation.
[Lord Nightmare]

-z800x: Fixed some incorrect opcodes and address register math in
segment mode. Olivetti M20 now can boot PCOS to the prompt.
[Christian Grössler]

-Minor fix to the character tile row ordering in apc
[Lord Nightmare]

-esq5505 updates [Christian Brunschen, R. Belmont]
* Fixed up clocks for 21 vs. 32-voice models
* Added ROMs for the 12-bit sample region on the SD-1 and SD-1
* Minor cleanups

-Fixed upd765 SIS status when fid = 4, this makes NEC PC-88VA to
attempt to DMA from floppy. [Angelo Salese]

-bw2: Fix disk select and quick hack to make the timings work
[O. Galibert]

-Olivetti M20: improved keyboard and floppy handling
[Christian Grössler]

-fixed various bugs with Acorn Archimedes IRQs [Angelo Salese]

-mirage: Make it boot by whatever means necessary [O. Galibert]

-Finished sample ROM dump for SD-1 & SD-1 32 [Christian Brunschen]

-Mirage: lots of documentation from the schematics, added
preliminary LED hookup [R. Belmont]

-a7000: Added RiscOS roms 3.60, 3.71, 4.02 and 4.39 [robcfg]

-mu100: Main screen turn on! [O. Galibert]

-pc98: Add its specific almost raw fdi disk format [O. Galibert]

-macrtc: Remove weird address swizzle that confused systems with
extended PRAM [Rob Braun]

-studio2: Documentation update. [Stiletto, Guru]

-mu100: Added older BIOS ver 1.05 [Stefan Lindberg]

-Implemented proper IRE and phase value to the palette for Atari 7800
[Robert Tuccitto]

-Mac: added “image” card which allows direct read/write access
to any vMac/BasiliskII compatible image under 256 MB, including HD
floppies. Disk is bootable if set in the control panel but only 
can eject from Finder.
[Rob Braun, R. Belmont]

-nubus_image: revised firmware allows multiple cards to work
[Rob Braun]

-nubus_image: add eject/insert support [Rob Braun]

-sf7000: Fixed floppy. [Curt Coder]

-m20: Implement memory map correctly. BASIC now shows its
startup banner. [Christian Grössler]

-vt100: added redumps of some of the vt102/vt131 roms [pjustice]

-vt100: updated a bunch of driver notes and rom defs to reflect current
research [Lord Nightmare]

-sf7000: Verified floppy format gap sizes. [Curt Coder]

-vt100: Verified that the checksum of the typed-from-manual
23-018e2 character generator ROM matches the dump from the actual
chip. [Lou Ernst Jr.]

-sms.c: Improved support for ‘3-D’ games. [Enik Land]

-dc: Added European DC bios 1.01c [BadAd84]

-mackbd: dumped correct ROM, prep for actual emulation
[Lord Nightmare, R. Belmont]

-a7800.c: Adjusted colorburst/tint/hue of entire palette to closer reflect
default hardware configuration setting of ~180 degrees
[i.e. $17 = 179.92706396 & $18 = 179.927063726]. [Robert Tuccitto]

Source Changes
-Added proper char roms for Wyse700 [John Elliott]

-upd765: Handle the rate correctly in FM [O. Galibert]

-upd765: Don’t choke on DDAMs [O. Galibert]

-upd765: Reset MA when sector is found on write data too [O. Galibert]

-imd: Accept versions with single-digit minor [O. Galibert]

-upd765: Get ready from the correct place in sense interrupt status
[O. Galibert]

-upd765: Better integration and support of FM [O. Galibert]

-pc floppies: Merge the common parts of d88/imd [O. Galibert]

-floppy: Fix index pulse generation when motor is always on
[O. Galibert]

-floppy: Added macros for declaring modern floppy formats. The
generic floppy formats (D88/DFI/IMD/IPF/MFI/MFM) are now automatically
supported in each driver using the modern floppy code. [Curt Coder]

-wd1772: Improved interrupts, added ready handling and FD1793
variant. [Curt Coder] 

-floppy: Default on head 0, not 1 [O. Galibert]

-upd1771.c – additional comment updates, including some upd1771
patents and internal workings information. [Lord Nightmare]

-wd1772: Added FD1771 and FD1797 variants. [Curt Coder]

-upd765, wd1772: Move to emu [O. Galibert]

-wd1772: Rename to wd_fdc [O. Galibert]

-upd765: Externalize the fdc [O. Galibert]

-wd_fdc: Add comments on the family [O. Galibert]

-wd_fdc: Change the feature functions into bools, and use the correct
pll for each chip [O. Galibert]

-wd_fdc: Describe track when formatting [O. Galibert]

-wd_fdc: fm support, need to review all timings [O. Galibert]

-floppy: Enhance ready support [O. Galibert]

-wd_fdc: Interrupt on ready support [O. Galibert]

-upd765.c: changes to busy flag, r/w sector increment and reset int

-upd765: Try another hypothesis [O. Galibert]

-floppy: restore/recalibrate is supposed to work like this [O.

-wd_fdc: Fix sector sizes and (most) timings [O. Galibert]

-wd_fdc: Change the fd179x timings to be tighter [O. Galibert]


电子邮件地址不会被公开。 必填项已用*标注